Unboxing and Assembling the Spectrum Aurora 18″ Diamond Luxe II Ring Light

Hi, I’m Caroline from Spectrum. In this video,
we’ll be unboxing and setting up the Spectrum Aurora
Diamond Luxe II Ring Light. Inside the box,
you’ll find a welcome pack, a Spectrum Aurora carry bag,
a power cable, the ring light itself, a mirror, a flexible gooseneck,
a flexible phone bracket, and the light stand. If you need any more help, just have a look at your User Guide
that comes with your product or go on the website
for full assembly instructions. Let’s have a look at the setup. Each ring light comes with a light stand. Now, be aware that the legs open
in the opposite direction. So, to set it up, unscrew the knob
and pull the two legs to open. And then, screw to tighten. When setting up your light stand,
remember to extend the vertical columns evenly
to ensure stability. To mount the ring light,
loosen the knob here and place it directly
onto your light stand, and screw to tighten. To mount the flexible gooseneck,
unscrew the knob as far as possible, not all the way but enough to allow it
to mount straight onto the light stand. And then, screw it tightly
to avoid any wobbling. It’s the same process
for the ring light itself. And then, screw it up tightly. Here are some safety tips
for when you use your ring light. When powering your ring light,
we strongly advise that you use a power surge protector. To power your ring light,
attach the power cable to the back of it. Switch it on, and use the knob to adjust
the intensity of the light. The other knob
adjusts the color temperature from cool to warm
for different skin tones. To ensure the stability
of your ring light, we recommend that you
use an optional sandbag on the front leg of
your light stand. This is a two-sided mirror. One side is magnified
and the other is normal. Mount it directly onto
the ring light like this, and screw the knob
at the bottom to secure it. To match your phone
onto the ring light, you need to use this two-part
flexible phone bracket. Connect the pieces like this and then attach your phone. And then, secure the entire thing
onto the ring light. Tighten this knob to secure. And, you can adjust
the position of your phone either to be horizontal
or vertical. But, remember to do up
the screw at the back to secure. This is a camera bracket
with a rotating ball head that you can use to mount
onto the bottom of any camera. Just screw it in and then mount that directly
onto the ring light. And, screw this knob here to secure. You can also rotate the camera
by undoing this knob here and adjusting it as you please. The camera bracket
also supports the phone holder and connects
in the same way like this. You can, then, connect your phone
directly onto the ring light like this. And, remember to screw
the knob here to tighten. You can also unscrew this knob here
to rotate the position that you like. You can also use this
optional multi-device bracket to connect any phone or device
up to 10.9 inches onto your ring light. To use it, just press
this side button to extend it. Attach your device, and then, press it down to secure. Then, attach the entire device
directly onto your ring light. And, tighten this knob here to secure. You can also attach any
tablet up to 10 inches using this optional
tablet bracket. Start by unlocking the bracket
by turning this knob 90 degrees to unlock. Then, open it up and attach the tablet
and fit into place. Remember, to lock it back up
by turning the knob 90 degrees again. Then, attach that entire mount
directly onto the ring light and turn the knob to tighten. To match your phone onto the ring light,
you need to use the gold L-shaped bracket and the phone holder. Start by mounting
your phone onto the phone holder. Then, mount the phone holder
onto the gold L-bracket. Then, attach the bracket
directly onto the ring light. Adjust and screw to tighten. And, you can make any
final adjustments for it to best fit. An optional desk stand is also available. To set that up,
just pull on all three legs and push on the central column
to stabilize. And then, screw the knob to tighten. The desk stand is a perfect option
if you have limited space. And, it’s also really easy to mount
your ring light to it. Just unscrew the knob, place it on top of the stand,
and screw to tighten. The optional mobile shutter remote
allows you to conveniently take photos in front of the camera like selfies. All you have to do is connect it to any
3.5-millimeter jack input. But, for some mobile devices,
you may need an adapter. The new Spectrum Aurora Ring Light
range consists of three lights: the Mini Pearl II 14-inch Ring Light, the Diamond Luxe II 18-inch Ring Light, and the Gold Luxe II 19-inch Ring Light.

1 thought on “Unboxing and Assembling the Spectrum Aurora 18″ Diamond Luxe II Ring Light

  1. Hey Aurora Fam! Hope you're liking our new range of Spectrum Aurora Ring Lights 💫
    We've included a list of timestamps below just for you. Thanks for watching!

    0:16 What's Included?
    0:33 User Guide
    0:43 Light Stand Setup
    1:15 Mounting the Ring Light
    1:45 Safety Tip – Power Surge Protector (SOLD SEPARATELY)
    2:14 Safety Tip – Using a Sand Bag (SOLD SEPARATELY)
    2:26 Mounting the Mirror
    2:46 Mounting the Flexible Phone Bracket
    3:24 Mounting the Camera Mount
    3:39 Mounting the Phone Bracket (SOLD SEPARATELY) with Camera
    4:16 Mounting the Multi-Device Bracket (SOLD SEPARATELY)
    4:42 Mounting the Tablet Bracket
    5:10 Mounting the Gold L-Bracket (SOLD SEPARATELY)
    5:48 Using the Desk Stand (SOLD SEPARATELY)
    6:14 Using the Mobile Shutter (SOLD SEPARATELY)
    6:39 Spectrum Aurora Ring Light Comparison (SOLD SEPARATELY)

Leave a Reply

Your email address will not be published. Required fields are marked *